B-12AWN Euro Cast Nut Washer DS
Application: B12A D/R Thread Bar Accessories are used with the Euro Bar, D/R Thread Bar, D9A D/R Thread Taper Tie or D30A D/R Thread She-Bolts for securing and spacing clamp-type forms. Features: Available in 15mm size Available with 2-1/2 threads per inch Designed to...B-13 Coil Nut DS
Application: B13 Coil Nuts are used with B12 Coil Rod in many applications and used in the field. Features: These nuts are right-hand threads. B13 Coil Nuts are available in 1/2″ to 1-1/2″ diameters. Two B13 Coil Nuts are required to develop B12 Coil Rod...B-14 Coil Bolts
Application: Coil bolts are designed to be reusable, but will wear and must be continuously inspected and replaced when wear or damage is noted. A waterproof grease should be applied to the portion of the bolt that will be embedded in the concrete. This will...B-2 Four Strut Coil Tie
Application: The coil ties can be used as a combination tie and form spreader when it is not necessary to keep the ends of the tie back from the face of the concrete. Features: It can be used with or without cones Can be combined with coil rod to form an adjustable...B-25 Heavy Coil Nut DS
Application: B25 Heavy Coil Nuts are used with B12 Coil Rod in many applications and uses in the field. Features: These nuts are available with right-hand or left-hand threads. B25 Heavy Coil Nuts are available in 1/2″ to 1-1/2″ diameter. One B25 Heavy...B-27 Coil Nut Washer DS
Application: B27 Nut Washers are designed to spread the forming loads over the wood forming members. Features: The B27 Nut Washer has a coil thread and can be used with all appropriate coil threaded devices. B27 Nut Washers combine the advantages of a washer and nut...B-29 Loose Plastic Cone DS
Application: B29 Loose Plastic Cones are used with B1 and B2 Coil Ties. Features: B29 Loose Plastic Cones are placed on the coil bolts after the coil bolts have been inserted through the form face but prior to threading the bolt into the coil tie. The large end of the...B-30 Screw-On Plastic Cones DS
Application: Screw-On Plastic Cones are designed to thread onto the protruding coil of a B3 Screw-On Coil Tie. Features: The large end of the cone provides sufficient bearing surface to prevent crushing of the plywood around the bolt hole. Cones are to be used for...B-30AS Setting She-Bolt Cone DS
Application: D30AS Setting She Bolt Cone internally spaces wall form and creates a 2″ setback from the face of the wall to the end of the inner rod. Features: Works with D/R thread bar and Euro bars Cone shape seals hole for no leakage and clean finish Safe...B-31/B-31A Rock Anchor
Application: Rock anchors are used in sound rock or concrete allows one-sided forming of walls or similar applications to be completed quickly and economically. Features: The B31/B31A Rock Anchor is not a reusable device. NC thread is available on special order. For...B-39 Coil Wing Nut DS
Application: B39 can be used for any application requiring quick removal and application of a nut. Features: Safe Working Loads are based on 1/2″ setback from the face of the concrete. Safe Working Load provides a factor of safety of approximately 2 to 1....ABOUT US
We combine the industry’s most complete product line with our highly experienced field consultants and formwork designers to deliver the most productive solutions for your project. We take all aspects of your project into account, ensuring that cycle times, ease of use, and adaptability are optimized.