C-52P Guardrail Speed Bracket Assembly DS
The C-52P Guardrail Speed Bracket Assembly is designed for fast and easy attachment to the C-49 Bridge Overhang Bracket. The C-52P’s Speed Bracket bolts securely to the C-49 Bridge Overhang Bracket and provides a base to simply install the Guardrail Post. The...C-53 Guard Rail Receptacle DS
The C53 Guard Rail Receptacle is designed to allow the easy installation of an OSHA required guard rail post on the exterior formwork of a bridge deck. The C53 receptacle slips over the end of the 2×6 (flat) nailer that is attached to and extends beyond the end...C-54 Bridge Overhang Extender DS
Features: Extends walkway additional 20 inches when used with C52 Guard rail receptacle Mounting hardware included Approvals/Compliance: OSHA compliant Installation: Follow spacing requirements as outlined by OSHA and other local agencies. Attach one extender per...C-59 Bridge Overhang Bracket Conversion Kit DS
Conversion kits are available for contractor-owned overhang brackets. The kits consist of the top and bottom vertical leg members, the top and bottom diagonal leg members and associated hardware. Consult with Dayton Superior for compatibility and availability....C-60 Type 1 Interior Hanger DS
The C60 Type 1 Pres-Steel Hanger is used for a zero haunch condition and consists of two 1/2″ end sections welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast...C-60 Type 1A Exterior Hanger DS
The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2″ 90 degree end section and a 1/2″ 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel...C-60 Type 2 Interior Hanger DS
The Type 2 hanger is similar to the Type 1 hanger, except it is designed to be used where the deck has up to a 1″ haunch. 1/8″ maximum clearance between the edge of the beam and the 1/2″ diameter coil bolts. To avoid decreasing the safe working load...C-60 Type 3 Interior Hanger DS
Designed for a 2-1/2″ maximum haunch. Uses a corrugated strap to connect the end clips, which are bent outward to provide stability under load. 1/8″ maximum clearance between the edge of the beam and the 1/2″ diameter coil bolts.C-60 Type 4 Interior Hanger DS
The C60 Type 4 Pres-Steel Hanger is a heavy duty hanger designed to be used when there is a fillet next to the beam flange. The hanger is manufactured using two 90° end sections that are electrically resistance welded to a 0.440″ diameter wire strut. The end...C-60 Type 4A Exterior Hanger DS
The Type 4-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.440″ diameter wire strut. Both end clips are designed to accept 1/2″ diameter coil bolts and/or coil...C-60 Type 5 Interior Hanger DS
The C60 – Type 5 – Pres-Steel Hanger is manufactured with two 1/2″ 90° end sections welded to a heavy duty wire strut. The Type 5 hanger is used similarly to the Type 4, but does not have the interlock end section feature. C60 Type 5 hangers with...ABOUT US
We combine the industry’s most complete product line with our highly experienced field consultants and formwork designers to deliver the most productive solutions for your project. We take all aspects of your project into account, ensuring that cycle times, ease of use, and adaptability are optimized.