C-60 Type 8 Interior Hanger DS
The Type 8 Press-Steel hanger is similar to the standard Type 1 except the two end clips are designed to angle the 1/2″ diameter bolts at 15° from vertical. It is available in two different versions, a standard version or a heavy version. The standard version...C-60 Type 9A Exterior Hanger DS
The type 9-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.750″ diameter wire strut. Both end clips are designed to accept 3/4″ diameter coil bolts and /or coil...C-61 Combination Hanger DS
Application: The 3/4″ diameter coil rod and the two End Sections are assembled in the field to make up a complete hanger. The length of the 3/4″ diameter coil rod that connects the two End Sections is equal to the beam’s flange width. The Combination...C-64 Type 4AN Exterior Hanger DS
The C64 45° Pres-Steel Hanger consists of a 90° end section and a 45° end section welded to a single wire strut. The Type 4-A is fabricated with a 1/2″ 45° end section and a 1/2″ 90° end section. Type 4-AN is similar with the exception of the 90° end...C-68 Type 4AB Exterior Hanger DS
The C68 45° Ty-Down Hanger is manufactured with a 1/2″ diameter 45° end section on one end of a substantial strut. The other end of the strut has a reinforced 180° wrap-around configuration. The reinforced, wrap-around end is fabricated to slip over the flange...C-89 Heavy Duty Bridge Overhang Bracket DS
Application: Both brackets come equipped with nail holes in the top of the horizontal channels for attaching 2×6 or 2×8 lumber (flat – required to prevent crushing the flange) and both brackets have built-in guardrail receptacles for 2×4 guardrail...Caution Tape
3” x 1000’ Caution TapeCETSEAL Sealant/Adhesive
CETSEAL is a multi-purpose, single component polyether moisture cure sealant/adhesive. CETSEAL is a low VOC, 100% solids, non- shrinking product with excellent UV resistance. The primary applications are: Grade termination sealant Membrane lap sealant Waterstop...ChemGrout CG-500 Series Grout Pump
ChemGrout CG-500 Series Grout Pump The ChemGrout CG-500 series are high volume production skid mounted grout plants. This versatile unit is designed to mix and pump neat cement, sanded grouts and most commercial pre-blended grout mixes. These units feature two...ChemMasters Anti-Spall 55
Anti-Spall 55 is a penetrating blend of double boiled linseed oil and mineral spirits for exterior concrete surfaces. USES Exterior, horizontal vertical concrete surfaces Concrete pavement and roadways, bridge decks and abutments Municipal, commercial or industrial...ChemMasters Aquanil™ Plus 100
Aquanil™ Plus 100 is a penetrating, chemically reactive alkyltrialkoxysilane ›95% solids, solvent based silane sealer that repels moisture and water from concrete and masonry. Aquanil™ Plus 100 is low VOC, non-etching, will not harm most uncoated glass, metal frames,...ABOUT US
We combine the industry’s most complete product line with our highly experienced field consultants and formwork designers to deliver the most productive solutions for your project. We take all aspects of your project into account, ensuring that cycle times, ease of use, and adaptability are optimized.