Featured Products:
The C64 hangers work well on bridge rehab projects, bridge widening jobs and other similar construction where only exterior formwork support is required.
| Data Sheet: |  |
Product Description
The C64 45° Pres-Steel Hanger consists of a 90° end section and a 45° end section welded to a single wire strut. The Type 4-A is fabricated with a 1/2″ 45° end section and a 1/2″ 90° end section. Type 4-AN is similar with the exception of the 90° end section is a 3/4″ unit.
Type 5-AN is similar to the 4-A but has a 3/4″ 90° end section and a 3/4″ 45° end section.
The C64 hangers work well on bridge rehab projects, bridge widening jobs and other similar construction where only exterior formwork support is required. Two appropriate sized B13 Hex Nuts are included with each hanger. The actual safe working load of the C64 hangers is highly dependent on the strength of the weld stud, as well as the strength of the weld itself. The safe working load is based on the use of a properly welded 3/4″ diameter stud with a minimum tensile strength of 80,000 psi.
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-52 Guard Rail Receptacle DS The C52 Guardrail Receptacle bolts to Dayton Superiors C49 bridge overhang bracket providing an OSHA approved receptacle for 2x4 guard rail posts. |
 | C-3 Coil Half Hanger DS Dayton Superior C3 Coil Half Hangers are 1/2" diameter coil hangers used on exterior structural steel bea |
 | C-41 Coil Rod Interior Hanger DS The C41 Coil Rod Hanger is a U shaped wire with (2) 90° bends which are threaded on both ends for 1/2" coil nuts. There is a 1" break back to the horizontal leg to the fixed hanger |