Mako Base Plate 4.5
The Base Plate 4.5 is used with the FinStand to expand the uses of the system to vapor barriers, concrete overlay, rock or sand plus any other type of substructure. The FinStand snaps and securely locks into the Base Plate. The assembly can be secured into place...Mako Driver
Short description above plus- Once the top of the marker aligns with the string line, the screed chair is then set at the proper height to accept a screed rail. The Driver is made of impact-resistant resin. The handguard protects the contractor when setting locations....Mako FinCap Screed Chair
short description above plus- The FinCap supports a nominal 1-1/2″ (40 mm) – schedule 40 or higher – galvanized pipe (1.5″ ID/1.9″ OD). The FinCaps are virtually indestructible and have a 100% no breakage money-back guarantee that they will not break, snap or crush...Mako FinCap Screed Chair
JAWS Screed Chairs are designed for a variety of screed rail sizes from 1/4″ (6 mm) to 2” (50 mm) and everything in between. All the JAWS chairs fit rebar or rods from 3/8″ (10mm) to 5/8″ (16 mm). The “fins” inside the barrel hug the rebar or stake so it will not...Mako FinStand
The FinStand is made of impact-resistant material and is virtually unbreakable. It can be used in a variety of ways on multiple surfaces. The FinStand supports the FinCap or JAWS screed supports with a 1/2″ all-thread. The stand can be adjusted 1.75″ (45 mm) with each...Marking Paint Seymour
Produces vivid marks, does not clog, and is safe for grass. The solvent-based formulation works well in low temperatures. Meets APWA color standards and is VOC compliant. May be sprayed by hand or with the Z-605 marking gun or Z-606 marking wand.Mason’s Line
Use Marshalltown Mason’s Line to create straight guiding lines to achieve the best level finish on all brick and stonework. This product is available in three distinct styles: Braided, Twisted, and Bonded Line. Braided Mason’s Line isn’t affected by extreme moisture...MasterEmaco® T 1060
DESCRIPTION T-1060 T1060 MasterEmaco T-1060 is a one-component, shrinkage-compensated, very rapid-setting, cement-based mortar. It is designed for repairing horizontal concrete surfaces where high early strength gain is required. MasterEmaco T-1060DR is a reduced dust...MasterEmaco® T 415
MasterEmaco T 415 repair mortar is one-component high-performance cementitious product. It produces high early strengths at a wide range of temperatures and can be placed into service for standard rubber-tire traffic in as little as 2 hours (depending on temperature)....MasterEmaco® A 660
MasterEmaco A 660 is an acrylic-polymer emulsion which enhances the physical properties, adhesion to substrates, and durability of Portland cement mortars, plasters, stucco, and concrete mixes. It is specifically recommended to enhance the performance of BASF’s...MasterEmaco® T 545
DESCRIPTION MasterEmaco T 545 is a one-component magnesium phosphate-based mortar. Offered in two formulations: T 545 for ambient and substrate temperatures below 85° F (29° C) and T 545 HT for ambient and substrate temperatures ranging from 85 to 100° F (29 to 38°...ABOUT US
We combine the industry’s most complete product line with our highly experienced field consultants and formwork designers to deliver the most productive solutions for your project. We take all aspects of your project into account, ensuring that cycle times, ease of use, and adaptability are optimized.