Featured Products:
The PTC Aztec® Tower Chair™ is an individual, all plastic rebar chair used to maintain the elevation of rebar in reinforced concrete. The PTC consists of a one-piece base molded from composite material and various height inserts to develop the required cover height. The Aztec® Tower Chair™ is constructed from USA manufactured materials and will not shatter in cold climates or sag in hot climates.
| Data Sheet: |  |
Product Description
APPLICATION
PTC Tower Chair is used for single mat rebar or wire mesh, both layers of double mat rebar or wire mesh, Tilt Wall, as a side form spacer and on-grade when used with a sand plate.
PRODUCT SPECIFICATION
The PTC consists of a one-piece base molded from composite material and various height inserts to develop the required cover height.
FEATURES
- Standard “concrete grey” color
- Minimal surface contact with deck
- Designed for maximum aggregate flow and concrete consolidation
- Fits up to #8 rebar
- Tower chair straddles lower rebar mat in double mat applications
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 7 Interior Hanger DS The C60 Type 7 Pres-Steel Hanger is similar to the standard Type 1 hanger but has the capacity to accommodate haunch heights up to 1-1⁄2". |
 | C-60 Type 3 Interior Hanger DS Designed for a 2-1/2" maximum haunch. Uses a corrugated strap to connect the end clips, which are bent outward to provide stability under load. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. |
 | D101 Dowel-In (DI) The Dayton Superior Dowel-In is available Straight (D101), 90°, and 180° Hooked (D102 and D103) and Double-Ended (D104). Each is manufactured from deformed rebar material and is available in rebar sizes #4 through #11. The threaded end of the Dowel-In is enlarged by forging, before threading, to ensure that the cross-sectional area of the bar is not reduced by the threading operation. This design feature assures full ultimate strength of the rebar. Dowel-Ins are configured to facilitate easy installation and can be easily assembled by hand. |