Featured Products:
The Sigma 400 Series is primarily used in board form, form liner and architectural wall applications. It is our smallest diameter tie coming in at .400” but packs a punch offering up to 5,000 lbs SWL. The 400M is a derivative of our 400 Series and is used in Symons panels and other steel ply panel applications. It allows for gang forming of the Symons panels offers up to 3,000 lbs SWL. Many also use the 400M for pencil rod replacement since it comes in 19 foot lengths.
| 400 Series Data Sheet: |  |
| 400M Series Data Sheet: | |
Product Description
400 Series Features:
- Cut to length on jobsite
- All thread stocked in 12′ lengths
- High strength nuts – double nut for higher load
- Non-corrosive!
- No patching!
- Eliminates thermal bridging
- Increased “R” factor
- Easier installation
- High strength
- Incredible versatility
- Drill and epoxy single-sided forming (2″ embed for single nut)
400M Series Features:
- Guaranteed loads unlike traditional steel pencil rod that can slip with set screw
- No patching!
- Non-corrosive!
- Easiest installation
- Cut to fit in the field
- Ensures perfect forming job every time
- Ties manufactured via CNC process to provide tightest quality standards
Manufacturer Info
Sigma DG Corp.
Sigma DG Corporation is a full-service fiberglass bolt provider across many industries. The main emphasis of our company is achieving the highest performing threaded fiberglass rods and making them useable with a variety of hardware, all at a reasonable cost. We are a leading provider of fiberglass threaded rods to the construction industry (fiberglass form ties), the mining industry (fully threaded bolts), concrete insulated panels (high-performance fiberglass connector pins), and providing any and all the above to marine, oil/gas, infrastructure industries and projects all over North America. There truly is no other company on earth that has the products, range of performance, and ability that Sigma DG can offer. We look forward to working with you!
Related Products:
| Image | Name |
|---|---|
 | Sigma 1000 Series Fiberglass Form Tie The Sigma 1000 Series fiberglass form tie is an original thread form that maximizes the properties of both fiberglass and steel to create the second strongest fiberglass threaded rod on the market today. |
 | Sigma 1200 Series Fiberglass Form Tie The 1200 Series form tie is our newest and highest performing member of the Sigma form tie lineup. It was developed for the heaviest and most demanding applications. The ability to space the ties out greatly reduces the cost but also being fiberglass, finish extremely easily and as with our other ties, there is never a need to patch holes! Replaces the largest and highest capacity taper ties, coil rods, and she-bolts. |
 | Sigma 800 Series Fiberglass Form Tie The Sigma 800 Series form tie hits the sweet spot in the Sigma forming lineup. It was developed for medium-duty applications to give similar performance to the workhorse of the forming world, the 15mm Euro Rod (Dywidag Rod). Not all forming systems are designed to accept ties greater in diameter than 1" (25mm). The new 800 Series fits this niche perfectly in these demanding applications. |