Featured Products:
FreezBan NC is a set accelerating and water reducing liquid admixture for concrete and masonry mortar. FreezBan NC is formulated without calcium chloride or chloride ions that may promote corrosion. FreezBan NC may be used in concrete or mortar in contact with reinforcing steel, door & window jams, and other metallic building materials. FreezBan NC improves the workability and finishing characteristics of concrete and mortar placed at cold temperatures.
| Data Sheet |  |
Product Description
USES
Plain concrete and mortar placements down to 15°F (-9°C)
· Setting brick, concrete block, stone, glass block, and structural clay tile
· In areas where specifications call for noncorrosive non-chloride accelerating admixture
· Precast, post-tensioned and cast-in-place structural concrete
ADVANTAGES
· Improves workability of concrete & masonry
· Permits masonry to bear loads sooner
· Improves adhesion and mortar density
· Increases early tensile and compressive
strengths
· Significantly reduces efflorescence
DIRECTIONS
Add FreezBan NC directly to the gauging water for each batch of mortar. Under no circumstances should FreezBan NC be added to the cement or mortar.
To obtain maximum results:
· Use a windbreak around mortar board and mixer to minimize the chill factor
· Keep sand and gauging water ice free
· Protect work from freezing for first 48 hours
· Keep walls dry next to metal door or window frames. Frames may corrode due to moisture and air
· If frames are scratched or abraded apply a metal primer
· Test compatibility of the prepared mortars before use
Manufacturer Info
ChemMasters
You can rely upon ChemMasters to employ:
- A strict adherence to all state and Federal regulations that govern what we make, how we make it, how and where they are consumed. You can use ChemMasters products with the satisfaction of knowing they are made by a family owned company with a deep reverence for the world in which we live.
- A state of the art research laboratory to design products that use fewer of the earth’s valuable resources.
- Corporate cultures to develop products that perform better, last longer, and minimize their impact on the environment throughout their life cycle.
- An emphasis on development of low-VOC and water-based technologies with reduced impact upon the air, water and land we all share.
- Education of our employees and consumers of ChemMasters products in the proper application and use of our products to improve the safety of our customers and the environment.
- Leadership in Energy & Environmental Design (LEED, Green Building Council).
Related Products:
| Image | Name |
|---|---|
 | Slip Stop, Slip-Resistant Additive |
 | ChemMasters Exposee™ Surface Retarder to Create Exposed Aggregate for Concrete Surfaces |
 | ChemMasters Polyseal™ WB 25% Solids Pure Acrylic Non-Yellowing Concrete Cure and Seal |