Featured Products:
The PTC Aztec® Tower Chair™ is an individual, all plastic rebar chair used to maintain the elevation of rebar in reinforced concrete. The PTC consists of a one-piece base molded from composite material and various height inserts to develop the required cover height. The Aztec® Tower Chair™ is constructed from USA manufactured materials and will not shatter in cold climates or sag in hot climates.
| Data Sheet: |  |
Product Description
APPLICATION
PTC Tower Chair is used for single mat rebar or wire mesh, both layers of double mat rebar or wire mesh, Tilt Wall, as a side form spacer and on-grade when used with a sand plate.
PRODUCT SPECIFICATION
The PTC consists of a one-piece base molded from composite material and various height inserts to develop the required cover height.
FEATURES
- Standard “concrete grey” color
- Minimal surface contact with deck
- Designed for maximum aggregate flow and concrete consolidation
- Fits up to #8 rebar
- Tower chair straddles lower rebar mat in double mat applications
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 4 Interior Hanger DS The C60 Type 4 Pres-Steel Hanger is a heavy duty hanger designed to be used when there is a fillet next to the beam flange. The hanger is manufactured using two 90° end sections that are electrically resistance welded to a 0.440" diameter wire strut. The end clips accepts 1/2" diameter coil rod and/or bolts which along with the coil nuts and washers support the interior formwork loads. |
 | C-60 Type 1A Exterior Hanger DS The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2" 90 degree end section and a 1/2" 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. The 90 degree end supports interior forming while the 45 degree end supports the overhang bracket on the exterior side of the beam. |
 | B-31/B-31A Rock Anchor B31/B31A Rock Anchor is a preassembled unit tapped with 1/2", 3/4" or 1" diameter coil thread. |