Featured Products:
The D250L Bar Lock Coupler is a Type 2 rebar coupler used to connect two pieces of rebar. It consists of a thick-walled tube, specially designed lock shear bolts, serrated grip rails, and a center stop pin. The D250L is made from USA melted and rolled steel.
| Data Sheet: |  |
Product Description
Application:
The D250L Bar Lock Coupler is used to provide a
continuous path of mechanical reinforcing from two
pieces of the same diameter rebar.
Product Specification:
- Rebar sizes #3 (13mm) through #18 (57mm).
- Available in plain, epoxy coated or galvanized finish
- Designed to achieve Type 2 splice when used with grade 60 rebar
Features:
- Quick and easy installation
- No bar end preparation
- Installation at the job site
- Used in tension, compression, and seismic applications
Benefits:
- Saves time and money
- No fabrication required
- One product for all applications
Approvals/Compliances:
- ACI 318 Type 2 (ASTM A615 or A706, Grade 60)
- IAPMO UES Listed (ER-0319)
- State Departments of Transportation
- AASHTO
- International Building Code (IBC)
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 3 Interior Hanger DS Designed for a 2-1/2" maximum haunch. Uses a corrugated strap to connect the end clips, which are bent outward to provide stability under load. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. |
 | C-60 Type 1A Exterior Hanger DS The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2" 90 degree end section and a 1/2" 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. The 90 degree end supports interior forming while the 45 degree end supports the overhang bracket on the exterior side of the beam. |
 | D-32 Coil Rod Coupler DS A coupler for coil rod. |