A46 Loop Ties are manufactured from high strength steel.
| Technical Data Sheet |  |
All loop ties can be manufactured with a tight fitting
neoprene washer collated near the center of the
tie. The water-resistant washer is designed to help
eliminate water seepage along the tie by breaking
the surface continuity of the wire.
Safe Working Load is 2,250 lbs. for standard or
3,000 lbs for heavy ties which provides a factor of
safety of approximately 2 to 1.
A46 Stainless Steel Loop Ties are available for
applications that require ties resistant to rusting or
other similar corrosion.
Due to the ductility of the type 304 stainless steel
wire, Dayton Superior cannot guarantee that A46
stainless steel ties will consistently provide proper
breakback.
Related Products:
| Image | Name |
|---|---|
 | C-41 Coil Rod Interior Hanger DS The C41 Coil Rod Hanger is a U shaped wire with (2) 90° bends which are threaded on both ends for 1/2" coil nuts. There is a 1" break back to the horizontal leg to the fixed hanger |
 | B2B3 Screw-on Coil Tie Screw-On Coil Tie is designed with longer coils that extend beyond the end of the struts. |
 | B-12 Coil Rod DS B12 Continuous Coil Threaded Rod is manufactured from high strength cold-rolled steel. |