Featured Products:
Dayton Superior’s Individual High Chair is used to support upper steel directly or by means of a carrier bar. Available in 2″ to 15″ heights in bright basic, plastic protected, epoxy-coated, or galvanized wire.
| Data Sheet: |  |
Product Description
APPLICATION
To support reinforcing bar or wire mesh during concrete placement in Flat Slab, Tilt Wall Panel, Elevated Slabs, Precast Panels projects, to maintain proper concrete coverage.
PRODUCT SPECIFICATION
Cover Height: Available in heights of 2″ to 15″ in increments of 1/4″. Chairs over 12″ require cross-bracing or lacing of legs.
FEATURES
- Forming cradle for placing reinforcing bar.
- Designed to resist deformation under
- construction loading.
- Wide leg span to allow chair to straddle lower bars.
- Foot designed for use on multiple forming surfaces. Plastic Dipped and Plastic Tipped chairs designed for exposed conditions, i.e. Tilt Wall Panels.
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 3 Interior Hanger DS Designed for a 2-1/2" maximum haunch. Uses a corrugated strap to connect the end clips, which are bent outward to provide stability under load. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. |
 | C-41 Coil Rod Interior Hanger DS The C41 Coil Rod Hanger is a U shaped wire with (2) 90° bends which are threaded on both ends for 1/2" coil nuts. There is a 1" break back to the horizontal leg to the fixed hanger |
 | B2B3 Screw-on Coil Tie Screw-On Coil Tie is designed with longer coils that extend beyond the end of the struts. |