B12 Continuous Coil Threaded Rod is manufactured from high strength cold-rolled steel.
| Data Sheet: |  |
Application:
B12 is capable of servicing many applications and uses in the field. It can be used as form ties,
combination ties with coil ties for concrete embedments, and for bridge hangers to bridge overhang bracket attachments.
Features:
- Available in 1/2″ to 1-1/2″ diameters
- Available in 12′ length
- Field cutting can be accomplished with bolt cutters or carborundum blades
- B12 requires one B25 or two B13 nuts to develop ultimate load
- 1/2″ dia.: Gr. 1035/1038/1045 MHC Steel
- 5/8″ & 3/4″ dia.: Gr. 1035/1045
- 7/8″, 1-1/4″ & 1-1/2″ dia.: Gr. 1045
- 1″ & 1-1/8″ dia.: Gr. 10V45
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 9A Exterior Hanger DS The type 9-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.750" diameter wire strut. Both end clips are designed to accept 3/4" diameter coil bolts and /or coil rods using B13H (Heavy Hex) nut. |
 | C-24 Type 3 Interior Hanger DS Our C24 Pres-Steel Half Hanger are interior form hangers that consist of a U shape end clip welded to a jogged wire strut |
 | D101 Dowel-In (DI) The Dayton Superior Dowel-In is available Straight (D101), 90°, and 180° Hooked (D102 and D103) and Double-Ended (D104). Each is manufactured from deformed rebar material and is available in rebar sizes #4 through #11. The threaded end of the Dowel-In is enlarged by forging, before threading, to ensure that the cross-sectional area of the bar is not reduced by the threading operation. This design feature assures full ultimate strength of the rebar. Dowel-Ins are configured to facilitate easy installation and can be easily assembled by hand. |