D2 She-Bolts are heavy-duty, reusable form ties for medium and heavy concrete construction.
| Data Sheet: |  |
Application:
She-Bolts are used in conjunction with D1 or D18 Inside Rods to form tie in a wide range of formwork thickness.
Features:
- The D2 She-Bolt has a 3/4″ diameter and is equipped with Acme thread.
- SWL=9,000 lbs. which provides an approximate safety factor of 2:1.
- The pitch (threads/inch) of the 3/4″ diameter Acme thread varies in certain geographical areas of the United States, please check before ordering.
- She-Bolts are meant to be reused, but they do wear so they must be continually inspected. When wear or damage is noted, they must be replaced.
- A water-proof grease should be applied to the embedded portion of the she-bolt to facilitate removal.
- The standard size is listed in the chart. Sizes other than standard are available on special order.
Related Products:
| Image | Name |
|---|---|
 | Jahn® Cornerlock DS A83 Jahn® Cornerlock is fabricated from high strength steel. |
 | D-9A Taper Tie With D/R Thread DS D9A Taper Ties are used to connect gang modular forms. |
 | Barlock® D-250 L-Series Coupler The D250L Bar Lock Coupler is a Type 2 rebar coupler used to connect two pieces of rebar. It consists of a thick-walled tube, specially designed lock shear bolts, serrated grip rails, and a center stop pin. The D250L is made from USA melted and rolled steel. |