Product Description

Polyseal™ WB is a high solids, water-based, non yellowing, acrylic concrete curing and sealing compound. This state-of-the-art proprietary formulation forms a tough acrylic film to effectively cure fresh concrete and protect older concrete. Polyseal™ WB creates a medium gloss membrane which remains clear throughout its service life. <100 g/L VOC

USES

• Interior concrete where a curing compound that meets ASTM C1315 standards is desired, but where the fumes from a solvent based product would be objectionable.
• Exterior concrete curing where a non-yellowing formulation is preferred and water-based clean-up is desired.
• Enhance the color and provide a uniform appearance of dry shake hardened floors, integral colored concrete and acid stained concrete while curing and sealing the surface.
• Seal and dustproof older interior or exterior concrete.

ADVANTAGES

• Protects concrete surfaces against deicing chemicals, fertilizers, salts, grease, oil, alkalies, mild acids and detergents.
• Minimizes spalling due to freeze-thaw cycle exposure, hair line checking, premature cracking, dusting and other common defects which result from improperly cured concrete.
• Seals out most construction dirt and stains, and prevents mortar, plaster and concrete droppings from bonding to concrete surfaces.
• Tint pack system available in twelve standard colors; special color matching available subject to minimum quantities.
• Tinted Polyseal WB may be used to cure or seal rough finished colored concrete and aids in hiding finishing imperfections or variations in color.