Featured Products:
A46 Loop Ties are manufactured from high strength steel.
| Technical Data Sheet |  |
Product Description
All loop ties can be manufactured with a tight fitting
neoprene washer collated near the center of the
tie. The water-resistant washer is designed to help
eliminate water seepage along the tie by breaking
the surface continuity of the wire.
Safe Working Load is 2,250 lbs. for standard or
3,000 lbs for heavy ties which provides a factor of
safety of approximately 2 to 1.
A46 Stainless Steel Loop Ties are available for
applications that require ties resistant to rusting or
other similar corrosion.
Due to the ductility of the type 304 stainless steel
wire, Dayton Superior cannot guarantee that A46
stainless steel ties will consistently provide proper
breakback.
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 8 Interior Hanger DS The Type 8 Press-Steel hanger is similar to the standard Type 1 except the two end clips are designed to angle the 1/2" diameter bolts at 15° from vertical. It is available in two different versions, a standard version or a heavy version. The standard version uses a 0.375" diameter wire to connect the end clips while the heavy version uses a 0.440" diameter wire. |
 | C-60 Type 1A Exterior Hanger DS The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2" 90 degree end section and a 1/2" 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. The 90 degree end supports interior forming while the 45 degree end supports the overhang bracket on the exterior side of the beam. |
 | C-24 Type 4AS Exterior Hanger DS C24 Pres-Steel Steel Beam Half Hangers are produced using a single end clip welded to a formed wire strut and are used where conditions prevent the use of regular exterior hangers.
Type S Half Hangers are designed for use on steel beams. The standard Type S Half Hanger uses a wire strut that measure 6" from the center line of the bolt to the end of the strut. |