Featured Products:
Dayton Superior’s Individual High Chair is used to support upper steel directly or by means of a carrier bar. Available in 2″ to 15″ heights in bright basic, plastic protected, epoxy-coated, or galvanized wire.
| Data Sheet: |  |
Product Description
APPLICATION
To support reinforcing bar or wire mesh during concrete placement in Flat Slab, Tilt Wall Panel, Elevated Slabs, Precast Panels projects, to maintain proper concrete coverage.
PRODUCT SPECIFICATION
Cover Height: Available in heights of 2″ to 15″ in increments of 1/4″. Chairs over 12″ require cross-bracing or lacing of legs.
FEATURES
- Forming cradle for placing reinforcing bar.
- Designed to resist deformation under
- construction loading.
- Wide leg span to allow chair to straddle lower bars.
- Foot designed for use on multiple forming surfaces. Plastic Dipped and Plastic Tipped chairs designed for exposed conditions, i.e. Tilt Wall Panels.
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-51 Wall Plate Assembly DS The C51 Wall Plate Assembly is used to mount a C49 Overhang Bracket directly to a 3/4” diameter insert cast in a precast/prestressed concrete box girder. |
 | C-60 Type 9A Exterior Hanger DS The type 9-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.750" diameter wire strut. Both end clips are designed to accept 3/4" diameter coil bolts and /or coil rods using B13H (Heavy Hex) nut. |
 | C-60 Type 1A Exterior Hanger DS The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2" 90 degree end section and a 1/2" 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. The 90 degree end supports interior forming while the 45 degree end supports the overhang bracket on the exterior side of the beam. |