Featured Products:
The PCC Aztec® Castle Chair is an individual, plastic, bar support used to maintain the elevation of rebar in reinforced concrete. They consist of a cone-shaped body, rebar saddles, and a wide base. PCC Aztec Castle Chairs are manufactured in the USA.
| Data Sheet: |  |
Product Description
APPLICATION
The PCC Aztec Castle Chair is used to support one layer of steel a required distance in elevation. It may be used to support steel on soft material form surface, such as carton forms or fill material.
PRODUCT SPECIFICATION
- Cover height 1-1/2″ to 6-1/4″ in 1/4″ increments
- Supports on average over 600 lbs. at room temperature
FEATURES
- Dual Height Saddles
- Large On-Grade Foot
- Dark Recycled Plastic
- Made in the USA Castle Chairs ranging in sizes 1-1/2″ to 4-1/4″ tall have a round base.
- Castle Chairs ranging in sizes 4-1/2″ to 6-1/4″ tall have a square base.
BENEFITS
- Withstands jobsite compressive loads without deforming
- Faster fulfillment times
- Contributes to LEED credits
- Less inventory with multiple heights in one
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-54 Bridge Overhang Extender DS
The C54 Extender is a steel channel that attaches to one side of the outboard end of the overhang bracket’s horizontal member to extend the usable working surface of the bracket and is used to support walkway loads only.
|
 | C-60 Type 4A Exterior Hanger DS The Type 4-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.440" diameter wire strut. Both end clips are designed to accept 1/2" diameter coil bolts and/or coil rods and nuts. |
 | D-9 Taper Tie With Coil Thread DS D9 Taper Ties are used to connect gang modular forms. |