Dayton Superior Slab Bolster is a continuous reinforcing bar support.
| Data Sheet: |  |
APPLICATION
Slab Bolster is used to support the lower slab reinforcing bar on a continuous 5ft long top wire.
FEATURES
- Available in cover heights from ¾” to 3” in 1/4“ increments
- Top wire corrugations are spaced on 1” centers and serve as guides for reinforcing bar spacing
- Available in plain, epoxy or galvanized coatings and stainless steel
- 5′ lengths standard, other lengths available as a special order
BENEFITS
Continuous design reduces labor time placing rebar
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 2 Interior Hanger DS The Type 2 hanger is similar to the Type 1 hanger, except it is designed to be used where the deck has up to a 1" haunch. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. To avoid decreasing the safe working load of the hanger, full bearing of the end clips is required. Hangers must be equally loaded on both sides to prevent formwork from tipping. |
 | B-25 Heavy Coil Nut DS B25 Heavy Coil Nuts are manufactured from high strength steel. |
 | Aztec® Castle Chair The PCC Aztec® Castle Chair is an individual, plastic, bar support used to maintain the elevation of rebar in reinforced concrete. They consist of a cone-shaped body, rebar saddles, and a wide base. PCC Aztec Castle Chairs are manufactured in the USA. |