Featured Products:
The D250SCA Bar Lock is a Type 1 rebar coupler consisting of a thick-walled tube, specially designed lock shear bolts, serrated grip rails, and a center stop pin. The D250SCA is made from USA melted and rolled steel.
| Data Sheet: |  |
Product Description
Application:
The D250SCA Bar Lock Coupler is used to provide a
continuous path of mechanical reinforcing between two
pieces of the same diameter rebar.
Product Specification:
■ Rebar sizes #3 (13mm) through #18 (57mm)
■ Available in plain, epoxy coated or galvanized finish
(call for availability for galvanized finish)
■ Designed to achieve Type 1 splice when used with
grade 60 rebar
Approvals/Compliance:
■ ACI 318 Type 1 (ASTM A615 or A706, Grade 60)
■ IAPMO UES Listed (Er-319)
■ AASHTO
■ International Build Code (IBC)
Features:
■ Quick and easy installation
■ No bar end preparation
■ Installation at the job site
■ Used in tension, compression, and seismic applications
Benefits:
■ Saves time and money
■ No fabrication required
■ One product for all applications
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | C-60 Type 8 Interior Hanger DS The Type 8 Press-Steel hanger is similar to the standard Type 1 except the two end clips are designed to angle the 1/2" diameter bolts at 15° from vertical. It is available in two different versions, a standard version or a heavy version. The standard version uses a 0.375" diameter wire to connect the end clips while the heavy version uses a 0.440" diameter wire. |
 | C-60 Type 2 Interior Hanger DS The Type 2 hanger is similar to the Type 1 hanger, except it is designed to be used where the deck has up to a 1" haunch. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. To avoid decreasing the safe working load of the hanger, full bearing of the end clips is required. Hangers must be equally loaded on both sides to prevent formwork from tipping. |
 | B-11 Flat Washer DS B11 Flat Washers are made from flat steel plate. |