Hydrophilic rubber strip waterstop with embedded stainless steel mesh to restrict expansion in length and width dimensions. Replaces conventional PVC in non-moving joints. Will withstand 150-foot hydrostatic head pressure. NSF certified for potable water.

Compressible hydrophilic sponge rubber waterstop. Lower expansion pressure allows the product to be used with as little as 1" of good quality concrete coverage. Commonly used in containment curbs and between precast segments. Will withstand 25 feet of hydrostatic head pressure

hydrophilic rubber strip waterstop with embedded stainless steel mesh to restrict expansion in length and width dimensions. Typically used in expansion joints where movement does not exceed 1/2". Also used in applications where high hydrostatic head resistance is needed. like dams.

Hydrophilic rubber string. Used to waterproof sheet pile, cracks, and CIPP pipe. Capable of stopping active leaks. String size should be 1.2 times the joint width. When stretched the string diameter can be reduced by about 40%. This enables it to get instant compression when inserted and release in the joint.

Hydrophilic rubber strip waterstop with adhesive back. Typically used for sealing piping penetrations, H-Beams, and concrete joints.

A hydrophilic, single compounent, elastic sealnt that has putty-like consistency. P-201 is the most versatile product in the Adeka product line. Commonly used in piping penetrations, sheet pile, precast segment, crack repair, CIPP pipe, cold/construction joints etc. P-201 is recommended for use with other Adeka strip products when the work surface is rough, spalled, cracked, or at connections. Once cured P-201 shows the same performance as pre-formed Adeka products.

CETSEAL is a multi-purpose, single component polyether moisture cure sealant/adhesive. CETSEAL is a low VOC, 100% solids, non- shrinking product with excellent UV resistance.

Durajoint EXPAND-Tite is a flexible concrete construction joint waterstop that is easy to install in non-moving joints.

Durajoint® PVC Waterstop is designed for use in concrete construction containing joints with one or more sides of the joint subject to hydrostatic pressure.

Earth Shield® Polyvinyl Chloride (PVC) Waterstop is used as a fluid-tight diaphragm, embedded in concrete, across and along the joint, for environmental engineered concrete structures. Earth Shield® Flexible PVC Waterstops are resistant to a wide range of water and wastewater treatment chemicals and are certified to meet or exceed the performance requirements of CRD C572-74.

Earth Shield® Stainless Steel Waterstop can stop even the most corrosive fluids in their tracks, even at severely elevated temperatures.

Earth Shield® Thermoplastic Vulcanizate Waterstop is used as a fluid-tight diaphragm, embedded in concrete, across and along the joint, for primary and secondary containment structures.