Your Trusted Supplier Since 1976
Form Tech serves as a one-stop shop providing concrete accessories and chemicals, tools and equipment, building materials and fasteners, erosion control and waterproofing, and safety products to professional contractors by meeting their distinct and customized supply needs in commercial and industrial markets.
Featured Products:
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
| Image | Name |
|---|---|
 | D-9A Taper Tie With D/R Thread DS D9A Taper Ties are used to connect gang modular forms. |
 | D101 Dowel-In (DI) The Dayton Superior Dowel-In is available Straight (D101), 90°, and 180° Hooked (D102 and D103) and Double-Ended (D104). Each is manufactured from deformed rebar material and is available in rebar sizes #4 through #11. The threaded end of the Dowel-In is enlarged by forging, before threading, to ensure that the cross-sectional area of the bar is not reduced by the threading operation. This design feature assures full ultimate strength of the rebar. Dowel-Ins are configured to facilitate easy installation and can be easily assembled by hand. |
 | D101A Dowel Bar (D-B) The D101A DB Dowel Bar is a Full-Ultimate rebar coupler used to connect rebar. It consists of an integral, nailing flange, a coupler forged from the end of the rebar, parallel and female threads. |
 | D48 Sure-Guard® Rebar Protector The D48 Sure-Guard Rebar Protector is a rebar safety cap used to prevent bar end contact in applications where impalement protection is not required. The D48 is made in the USA. |
 | G-14 Heavy Duty Screed Holders DS Dayton Superior G14 Heavy Duty Screed Holders consist of a rolled steel plate welded to a length of 1" diameter coil rod. The G14 screed holder is used with a free-fit screed base to support screed pipe of various sizes. |
 | G-16 Heavy Duty Screed Chair Base DS Dayton Superior G16 Heavy Duty Screed Chair Base is a rigid support designed for heavy vibratory screed applications. |
 | Individual High Chair Dayton Superior's Individual High Chair is used to support upper steel directly or by means of a carrier bar. Available in 2" to 15" heights in bright basic, plastic protected, epoxy-coated, or galvanized wire. |
 | Insertion Tool DS A59 Insertion Tool consists of three parts: Galvanized Collar, Handle, and Stem Product. |
 | J10W White Resin Cure A water-based, liquid membrane forming, resin curing compound for freshly finished concrete. The White Resin Cure J10W is white pigmented to reflect the heat of the sun. |
 | Jahn® A Bracket DS A81 Jahn® "A" bracket is fabricated from high strength steel with a cad plated eccentric and painted body. |
 | Jahn® C Bracket DS A82 Jahn® "C" Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. |
 | Jahn® Cornerlock DS A83 Jahn® Cornerlock is fabricated from high strength steel. |
 | Jahn® Scaffold Jack DS A89 Jahn® Scaffold Jack is manufactured from high strength steel. |
 | Magic Kote® Magic Kote is a V.O.C. compliant, ready-to-use, petroleum-based, chemically neutral, diesel-free concrete form release. Magic Kote is water-insoluble and contains no waxes. Magic Kote effectively prevents the bonding of concrete to forms and formliners. Use of Magic Kote regularly will increase the life of all forms. |
 | One-Piece Waler Bracket DS The one-piece waler bracket is fast and simple to install. Just insert the waler bracket into any siderail hole not being used for ties, place a single or double 2x4 piece of lumber on top of the bracket, and drop the attached wedge into position. No additional hardware needed. |
 | PC110 Suprotek® Impalement Rebar Cap The patented, PC110 Suprotek Impalement Safety Cap for Rebar is an OSHA approved, safety device used to eliminate impalement of falling workers from a height. It consists of a highly visible, safety orange top over a heavy-duty, steel plate. |
 | Plain Dobies Plain style Dobie rebar supports offer multiple sizes for various cover requirements and are used for spacing the reinforcement and setting cover height above grade or formwork. Suited for footing and foundation reinforcement work where heavy concentrations of rebar occur. |
 | Plylag DS B21 Plylags are manufactured from 1/2" diameter coil rod. |
 | Pro-Poxy 400 Acrylic Anchoring Gel Epoxy Gel Anchor |
 | Rod Clamp DS D12 Rod Clamps are made from cast malleable iron. |
 | Rod Tightening Wrench DS D14 Tightening Wrench is made from ductile iron. |
 | Scaffold Bracket Jack DS A90 Scaffold Bracket Jack is manufactured from high strength steel. |
 | Slab Bolster Dayton Superior Slab Bolster is a continuous reinforcing bar support. |
 | Slab Bolster Upper The SBU Slab Bolster Upper is a continuous metal bar support used to maintain the elevation of rebar in reinforced concrete. They consist of two runner wires and a top supporting wire connected by evenly spaced legs. SBU Slab Bolster Uppers are melted, rolled, and manufactured in the USA. |
 | Snap Tie Shank Wrench DS A29 Snap Tie Wrench is manufactured from high strength steel. |
 | Sure Anchor J-51 Epoxy Gel Anchor |
 | Sure-Lock® Bracket DS The A56 Sure-Lock® Bracket is a sturdy bracket designed with a rotating arm. |
 | Sure-Lock® Strongback Clamp DS A57 Sure-Lock® Strongback Bracket is manufactured from high strength steel. |
 | Sure-Lock® Tie DS A55 Sure-Lock Ties are manufactured from high strength steel. |
 | T-13 Coil Anchor Dayton Superior T13 Coil-Anchor drill-in anchors
are used for attaching braces to the floor slab. |
 | Unetra Clamp DS D12F Form Clamp is available in one size to handle all smooth and deformed pencil rod diameters from 1/4" to 3/8". |
 | Waler Tie DS A53 Waler Tie is manufactured from high strength steel. |
 | Wedge Bolt DS A51 Wedge Bolts are manufactured from high strength steel. |
 | Z Tie Holder DS A52 Z Tie Holder is manufactured from high strength steel. |