Featured Products:
The CHCU Continuous High Chair Upper is a continuous metal bar support used to maintain the elevation of rebar in reinforced concrete. They consist of two runner wires and a top supporting wire connected by evenly spaced legs. Continuous High Chair Uppers are melted, rolled, and manufactured in the USA.
| Data Sheet: |  |
Product Description
APPLICATION
The CHCU Continuous High Chair Upper is used to support one layer of steel above another and space them to the required distance. It may be used to support steel on soft material form surfaces, such as carton forms or fill material.
PRODUCT SPECIFICATION
- Cover height 2″ to 30″ in 1/4″ increments
- Available in plain, epoxy coated or galvanized finish
- Available in plastisol dipped runners
- Available in carbon steel, stainless steel, and chromium steel
FEATURES
- Strong, resistance welded construction
- Made in the USA
BENEFITS
- Withstands jobsite compressive loads without deforming
- Faster fulfillment times
Manufacturer Info
Dayton Superior
AT DAYTON SUPERIOR, WE ARE BUILDING STRENGTH
From our 17,000 hard-working products to our 1200+ dedicated people, Dayton Superior is all about building strength. As the leading single-source provider of concrete accessories, chemicals, and forming products for the non-residential construction industry, we deliver strong, proven products and build strong relationships built on integrity, responsiveness, and unwavering support.
ACCESSORIES
Meticulous attention to detail is built into every product we sell. Our comprehensive range of accessories for every concrete job is unmatched in the industry.
CHEMICALS
Repair, connect, seal, and protect new and existing concrete with our superior portfolio of concrete chemical solutions.
FORMING
Precision endurance, performance, and strength are engineered into our forming systems, including the globally recognized Symons® by Dayton Superior brand.
Related Products:
| Image | Name |
|---|---|
 | A-46 Loop Tie DS A46 Loop Ties are manufactured from high strength steel. |
 | C-60 Type 2 Interior Hanger DS The Type 2 hanger is similar to the Type 1 hanger, except it is designed to be used where the deck has up to a 1" haunch. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. To avoid decreasing the safe working load of the hanger, full bearing of the end clips is required. Hangers must be equally loaded on both sides to prevent formwork from tipping. |
 | Aztec® E-Z Lok Wheel™ Dayton Superior manufactures a complete line of rebar and/or mesh supports. All Dayton Superior rebar supports are manufactured to the recommendations or specifications of the Concrete Reinforcing Steel Institute (CRSI). |