Your Trusted Supplier Since 1976
Form Tech serves as a one-stop shop providing concrete accessories and chemicals, tools and equipment, building materials and fasteners, erosion control and waterproofing, and safety products to professional contractors by meeting their distinct and customized supply needs in commercial and industrial markets.
Featured Products:
| Image | Name |
|---|---|
 | C-24 Type 7 Interior Hanger DS Our C24 Pres-Steel Half Hanger are interior form hangers that consist of a U shape end clip welded to a jogged wire strut |
 | C-24 Type 8 Interior Hanger DS Our C24 Pres-Steel Half Hanger are interior form hangers that consist of a U shape end clip welded to a jogged wire strut |
 | C-25 Adjustable Exterior Half Hanger DS These half hangers are used to support overhang brackets for exterior deck formwork where one-sided forming is required, welding is not permitted and rebar or headed stud shear connectors are available to connect the hanger to. |
 | C-25 Heavy Duty Adjustable Half Hanger DS These half hangers are used to support overhang brackets for exterior deck formwork where one-sided forming is required, welding is not permitted and rebar or headed stud shear connectors are available to connect the hanger to. |
 | C-3 Coil Half Hanger DS Dayton Superior C3 Coil Half Hangers are 1/2" diameter coil hangers used on exterior structural steel bea |
 | C-41 Coil Rod Interior Hanger DS The C41 Coil Rod Hanger is a U shaped wire with (2) 90° bends which are threaded on both ends for 1/2" coil nuts. There is a 1" break back to the horizontal leg to the fixed hanger |
 | C-41 Type 4A Coil Rod Exterior Hanger DS L shape wire with a welded 45° strut supports exterior overhang bracket while other end is threaded with a length of 1/2” coil thread to supports interior decking formwork. |
 | C-60 Type 1 Interior Hanger DS The C60 Type 1 Pres-Steel Hanger is used for a zero haunch condition and consists of two 1/2" end sections welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. |
 | C-60 Type 1A Exterior Hanger DS The C60 45 degree Pre-Steel Hanger Type 1A consists of a 1/2" 90 degree end section and a 1/2" 45 degree end section welded to a single wire strut. The hanger allows installation and adjustment from the top of the formwork and works equally well on steel or precast concrete beams. The 90 degree end supports interior forming while the 45 degree end supports the overhang bracket on the exterior side of the beam. |
 | C-60 Type 2 Interior Hanger DS The Type 2 hanger is similar to the Type 1 hanger, except it is designed to be used where the deck has up to a 1" haunch. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. To avoid decreasing the safe working load of the hanger, full bearing of the end clips is required. Hangers must be equally loaded on both sides to prevent formwork from tipping. |
 | C-60 Type 3 Interior Hanger DS Designed for a 2-1/2" maximum haunch. Uses a corrugated strap to connect the end clips, which are bent outward to provide stability under load. 1/8" maximum clearance between the edge of the beam and the 1/2" diameter coil bolts. |
 | C-60 Type 4 Interior Hanger DS The C60 Type 4 Pres-Steel Hanger is a heavy duty hanger designed to be used when there is a fillet next to the beam flange. The hanger is manufactured using two 90° end sections that are electrically resistance welded to a 0.440" diameter wire strut. The end clips accepts 1/2" diameter coil rod and/or bolts which along with the coil nuts and washers support the interior formwork loads. |