Your Trusted Supplier Since 1976
Form Tech serves as a one-stop shop providing concrete accessories and chemicals, tools and equipment, building materials and fasteners, erosion control and waterproofing, and safety products to professional contractors by meeting their distinct and customized supply needs in commercial and industrial markets.
Featured Products:
| Image | Name |
|---|---|
 | C-60 Type 4A Exterior Hanger DS The Type 4-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.440" diameter wire strut. Both end clips are designed to accept 1/2" diameter coil bolts and/or coil rods and nuts. |
 | C-60 Type 5 Interior Hanger DS The C60 - Type 5 - Pres-Steel Hanger is manufactured with two 1/2" 90° end sections welded to a heavy duty wire strut. The Type 5 hanger is used similarly to the Type 4, but does not have the interlock end section feature. C60 Type 5 hangers with 3/4" 90° end sections are available on special order. |
 | C-60 Type 7 Interior Hanger DS The C60 Type 7 Pres-Steel Hanger is similar to the standard Type 1 hanger but has the capacity to accommodate haunch heights up to 1-1⁄2". |
 | C-60 Type 8 Interior Hanger DS The Type 8 Press-Steel hanger is similar to the standard Type 1 except the two end clips are designed to angle the 1/2" diameter bolts at 15° from vertical. It is available in two different versions, a standard version or a heavy version. The standard version uses a 0.375" diameter wire to connect the end clips while the heavy version uses a 0.440" diameter wire. |
 | C-60 Type 9A Exterior Hanger DS The type 9-A Pres-Steel Hanger is fabricated with a 90° interlock type end clip and a 45° end clip, both of which are electric resistance welded to a 0.750" diameter wire strut. Both end clips are designed to accept 3/4" diameter coil bolts and /or coil rods using B13H (Heavy Hex) nut. |
 | C-61 Combination Hanger DS The C61 Combination Exterior Hanger is consists of three individual parts made up of a 90° Interior End Section with an integral interlock, a length of 3/4" diameter coil rod (cut to flange width) and a Combination Exterior End Section. |
 | C-64 Type 4AN Exterior Hanger DS The C64 hangers work well on bridge rehab projects, bridge widening jobs and other similar construction where only exterior formwork support is required. |
 | C-68 Type 4AB Exterior Hanger DS The C68 45° Ty-Down Hanger is manufactured with a 1/2" diameter 45° end section on one end of a substantial strut. The other end of the strut has a reinforced 180° wrap-around configuration. The reinforced, wrap-around end is fabricated to slip over the flange of a steel bridge beam. |
 | SB Adjustable Joist Hanger Temporary support bracket for lumber joists and bridge deck material |